AEMC | Digital Multimeters

Manufacture: AEMC
Product Description: The MTX Mobile Multimeter Model MTX 3283B-COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 200kHz bandwidth. The unique design features a multi-position screen and push button function selection and is ideally suited for both benchtop and hand-held use.

Features:

• Large graphic LCD display, bilingual menus (English/French)
• LED backlighting for easier reading and lower power consumption
• Four line 100,000-count digital display, bargraph and graphic
• Shows four variables simultaneously
• Basic accuracy 0.02%, specified bandwidth 200kHz
• 8-key virtual measurement selectors
• Frequency measurements up to 2MHz
• Temperature measurements with Pt 100 or Pt 1000 probes and J or K thermocouples
• Storage of 6500 measurements with date and time
• USB communication
• Two 1.5V AAA rechargeable batteries are included
• Power pack reduces the average charging time of the batteries
• PC-software included to store, analyze and transfer data
• UL and CUL approved; 600V CAT IV; 1000V CAT III

Application:

• AC + DC volts from 100.000mV to 1000.0V
• AC + DC current from 1000.00microA to 20.000A
• Frequency from 10.000Hz to 2MHz
• Resistance, continuity, diode test, capacitance, temperature and more

Product PDF for AEMC Model MTX3283-COMCM
[Catalog No. 2125.76]
Digital Multimeter (TRMS, 100,000-count, USB Communication, Graphical, Auto, Auto Peak, Rel, BW 200kHz)

Product AEMC Model MX26 [Catalog Number 2119.25]
Digital Multimeter (5000-count, TRMS, 0.3% accuracy, with holster) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The Model MX26 is an accurate TRMS Digital Multimeter (DMM) designed for everyday electrical applications. The 5000-count display incorporates a 34-segment bargraph. The ergonomic design and balance make it very comfortable to hold and operate function seclections quickly and easily using the large rotary dial. All standard multimeter functions are available including volts, amps, frequency, ohms, continuity and diode checking plus a low impedance AC volt mode useful in eliminating ghosting. The Model MX26 is safety rated to EN 61010, 600V CAT III.

Features:

• TRMS (AC+DC) measurements for accurate results
• Bandwidth up to 100kHz
• An innovative design with a compact, double insulated rugged case
• Large, easy-to-read display with bargraph and backlight
• Functions include: Min/Max, Avg, Mem and Auto Mem
• Measure AC volts up to 750V and DC volts up to 1000V
• Includes rugged, shockproof, protective holster and test leads plus Multistand (for lead and probe storage)
• Dustproof, IP 40 rated

Application:

• Measure AC volts and amps in power panels
• Check continuity
• Troubleshoot motor controlled circuits
• Measure resistance, capacitance and frequency

Product PDF for AEMC Model MX26
[Catalog No. 2119.25]
Digital Multimeter (5000-count, TRMS, 0.3% accuracy, with holster)

Manufacture: AEMC
Product Description: The tough, reliable, economical Model CA5260 Digital Multimeter (DMM) with a 4000-count display is average sensing and provides 1% accuracy of reading. The multimeter has a large backlit display, clear push-button functions, large rotary range selector and dedicated push buttons. The compact, hand-held size along with the rugged, shockproof rubber holster makes this unit ideal for toolboxes and pockets. The Model CA5260 is rated to EN 61010, 600V CAT III for protection against spikes and over-voltage.

Features:

• Tough, reliable, economical, professional 4000-count model
• 40micro F, 400micro F, 4000micro F ranges, microA ranges
• Automatic range selection (V, A, ohms)
• Ultra sensitive current measurement down to 0.1microA
• Large backlit display
• Min/Max with 500ms acquisition time
• Hold function
• Clear pushbutton functions
• Large rotary range selector and dedicated push buttons
• Safety rated to EN 61010, 600V Cat. III for protection against spikes and overvoltage
• Complete line of accessories including leads and industry's largest selection of current probes
• Includes rugged, shockproof, protective dirt resistant gray holster with Multistand (for lead and probe storage) and test leads
• Three year warranty

Application:

• Installation, repair or maintenance of industrial equipment
• Electrical field testing
• Troubleshooting failures and poor performance

Product PDF for AEMC Model CA5260
[Catalog No. 2116.78]
Digital Multimeter (4,000-count, Average Sensing, 1% Accuracy)

Manufacture: AEMC
Product Description: The Model MX57EX TRMS is an intrinsically safe digital multimeter designed for use in dangerous or explosive atmospheres. This meter is considered as a passive device without inductive or capacitive issues that are problematic in dangerous or explosive environments. This meter provides high functionality in a unique case designed for enhanced safety, reliability, ease-of-maintenance and protection from contaminants.

Features:

• LCI 07: 0010X
• Safety rating: IEC 61010-1: 2001 Agency Approval: IECEx LC107.0010 X, LCIE 02 ATEX 6005 X, Ex II 2 G D or Ex I M2, Ex ib I, Ex ib IIC T5 or T4 or T3 , Ex ibD 21 T
• Logic signal measurement and ADP input
• Min/Max/Avg functions
• Bargraph with zoom (x5) and center zero
• Rugged design - IP67 rating
• Protection by 500mA intrinsic safety fuse for the current range
• Includes test leads

Application:

• Oil refineries
• Mining
• Pharmaceutical plants

Product PDF for AEMC Model MX57EX TRMS
[Catalog No. 2130.66]
Digital Multimeter (IECEx LCIE 07.0010 X, LCIE 02 ATEX 6005 X, Intrinsically safe, TRMS, 50,000-count, 0.025% Accuracy)

Manufacture: AEMC
Product Description: The MTX Mobile Multimeter Model MTX 3281B-COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 50kHz bandwidth. The unique design features a multi-position screen and push button function selection and is ideally suited for both benchtop and hand-held use.

Features:

• Large graphic LCD display, bilingual menus (English/French)
• LED backlighting for easier reading and lower power consumption
• Four line 100,000-count digital display, bargraph and graphic
• Shows four variables simultaneously
• Basic accuracy 0.02%, specified bandwidth 50kHz
• 8-key virtual measurement selectors
• Frequency measurements up to 2MHz
• Temperature measurements with Pt 100 or Pt 1000 probes and J or K thermocouples
• Storage of 6500 measurements with date and time
• USB communication
• Two 1.5V AAA rechargeable batteries are included
• Power pack reduces the average charging time of the batteries
• PC-software included to store, analyze and transfer data
• UL and CUL approved; 600V CAT IV; 1000V CAT III

Application:

• AC + DC volts from 100.000mV to 1000.0V
• AC + DC current from 1000.00microA to 20.000A
• Frequency from 10.000Hz to 2MHz
• Resistance, continuity, diode test, capacitance, temperature and more.

Product PDF for AEMC Model MTX3281-COMCM
[Catalog No. 2125.74]
Digital Multimeter (TRMS, 100,000-count, USB Communication, Graphical, BW 50kHz)

Manufacture: AEMC
Product Description: The MTX Mobile Multimeter Model MTX 3282B-COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 100kHz bandwidth. The unique design features a multi-position screen and push button function selection and is ideally suited for both benchtop and hand-held use.

Features:

• Large graphic LCD display, bilingual menus (English/French)
• LED backlighting for easier reading and lower power consumption
• Four line 100,000-count digital display, bargraph and graphic
• Shows four variables simultaneously
• Basic accuracy 0.02%, specified bandwidth 100kHz
• 8-key virtual measurement selectors
• Frequency measurements up to 2MHz
• Temperature measurements with Pt 100 or Pt 1000 probes and J or K thermocouples
• Storage of 6500 measurements with date and time
• USB communication
• Two 1.5V AAA rechargeable batteries are included
• Power pack reduces the average charging time of the batteries
• PC-software included to store, analyze and transfer data
• UL and CUL approved; 600V CAT IV; 1000V CAT III

Application:

• AC + DC volts from 100.000mV to 1000.0V
• AC + DC current from 1000.00microA to 20.000A
• Frequency from 10.000Hz to 2MHz
• Resistance, continuity, diode test, capacitance, temperature and more.

Product PDF for AEMC Model MTX3282-COMCM
[Catalog No. 2125.75]
Digital Multimeter (TRMS, 100,000-count, USB Communication, Graphical, Auto, Auto Peak, BW 100kHz)

Manufacture: AEMC
Product Description: The MTX Mobile Multimeter Model MTX 3283B-BT COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 200kHz bandwidth and Bluetooth communication technology. The unique design features a multi-position screen and push button function selection and is ideally suited for both benchtop and hand-held use.

Features:

• Large graphic LCD display, bilingual menus (English/French)
• LED backlighting for easier reading and lower power consumption
• Four line 100,000-count digital display, bargraph and graphic
• Shows four variables simultaneously
• Basic accuracy 0.02%, specified bandwidth 200kHz
• 8-key virtual measurement selectors
• Frequency measurements up to 2MHz
• Temperature measurements with Pt 100 or Pt 1000 probes and J or K thermocouples
• Storage of 6500 measurements with date and time
• Bluetooth communication
• Two 1.5V AAA rechargeable batteries are included
• Power pack reduces the average charging time of the batteries
• PC-software included to store, analyze and transfer data
• UL and CUL approved; 600V CAT IV; 1000V CAT III

Application:

• AC + DC volts from 100.000mV to 1000.0V
• AC + DC current from 1000.00microA to 20.000A
• Frequency from 10.000Hz to 2MHz
• Resistance, continuity, diode test, capacitance, temperature and more.

Product PDF for AEMC Model MTX3283-BT
[Catalog No. 2125.79]
Digital Multimeter (TRMS, 100,000-count, USB & Bluetooth Communication, Graphical, Auto, Auto Peak, Rel, BW 200kHz)

Product AEMC Model MX55 [Catalog No. 2116.71]
Digital Multimeter (50,000-count, TRMS, 0.025% Accuracy, with Holster) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The Model MX55 is a hand-held professional 50,000-count digital multimeter that measures up to the toughest standards. This True RMS (AC or AC+DC) meter provides accurate measurements of non-sinusoidal waveforms. The Model MX55 measures AC Amps, AC Volts, DC Amps, DC Volts, Resistance, Continuity, Capacitance, Frequency and has a Diode Test function. AC Voltage measurement can be displayed in Volts, in dB or in resistance power. Ultra-high input impedance which is selectable to 1G ohms on the 500mV range. Built into a rugged housing which provides a separate battery and fuse compartment to isolate the DMMs electronics from contamination. The Model MX55 is waterproof, IP 67 rate as well as CE marked.

Features:

• 50,000-count selectable
• Accuracy to 0.025%
• 600VAC/DC measurements
• True RMS (AC or AC plus DC)
• Selectable to 1Gohm on the 500mV range
• EN 61010, 600V Cat. III and 1000V Cat. II
• IP67 rated
• RS-232 communication available
• Includes rugged, shockproof, protective, blue holster with Multistand (for lead and probe storage) and test leads
• Three year warranty

Application:

• Installation, repair or maintenance of industrial equipment
• Design verification of prototype/production units
• Troubleshooting failures and poor performance
• Quality analysis.

Product PDF for AEMC Model MX55
[Catalog No. 2116.71]
Digital Multimeter (50,000-count, TRMS, 0.025% Accuracy, with Holster)

Product AEMC Model CA5210 [Catalog No. 2116.74]
Digital Multimeter (4,000-count, Average Sensing, 1% Accuracy) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The tough, reliable, economical CA5210 Digital Multimeter (DMM ) with a 4000-count display is average sensing and provides 1% accuracy of reading. The multimeter has a large backlit display, clear push-button functions, large rotary range selector and dedicated push buttons. The compact, hand-held size along with the rugged, shockproof rubber holster makes this unit ideal for toolboxes and pockets. The Model CA5210 is rated to EN 61010, 600V CAT III for protection against spikes and over-voltage.

Features:

• Tough, reliable, economical 4000-count model
• Large backlit display
• Clear pushbutton functions
• Large rotary range selector and dedicated push buttons
• Safety rated to EN 61010, 600V Cat. III for protection against spikes and overvoltage
• Complete line of accessories including leads and industry's largest selection of current probes
• Includes rugged, shockproof, protective dirt resistant gray holster with Multistand (for lead and probe storage) and test leads
• Three year warranty

Application:

• Installation, repair or maintenance of industrial equipment
• Electrical field testing
• Troubleshooting failures and poor performance.

Product PDF for AEMC Model CA5210
[Catalog No. 2116.74]
Digital Multimeter (4,000-count, Average Sensing, 1% Accuracy)

Product AEMC Model CA5230 [Catalog No. 2116.76]
Digital Multimeter (4,000-count, TRMS, 0.25% Accuracy) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The tough, reliable, economical CA5230 Digital Multimeter (DMM ) with a 4000-count display is TRMS and provides 0.25% accuracy of reading. The multimeter has a large backlit display, clear push-button functions, large rotary range selector and dedicated push buttons. The compact, hand-held size along with the rugged, shockproof rubber holster makes this unit ideal for toolboxes and pockets. The Model CA5230 is rated to EN 61010, 600V CAT III for protection against spikes and over-voltage.

Features:

• Tough, reliable, economical 4000-count model
• Large backlit display
• Clear pushbutton functions
• Large rotary range selector and dedicated push buttons
• Safety rated to EN 61010, 600V Cat. III for protection against spikes and overvoltage
• Complete line of accessories including leads and industry's largest selection of current probes
• Includes rugged, shockproof, protective dirt resistant gray holster with Multistand (for lead and probe storage) and test leads
• Three year warranty

Application:

• Installation, repair or maintenance of industrial equipment
• Electrical field testing
• Troubleshooting failures and poor performance.

Product PDF for AEMC Model CA5230
[Catalog No. 2116.76]
Digital Multimeter (4,000-count, TRMS, 0.25% Accuracy)

Product AEMC Model CA5240 [Catalog Number 2116.77]
Digital Multimeter (40,000-count, TRMS, 0.1% Accuracy) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The tough, reliable, economical CA5240 Digital Multimeter (DMM ) with a 40,000-count display is TRMS and provides 0.1% accuracy of reading. The multimeter has a large backlit display, clear push-button functions, large rotary range selector and dedicated push buttons. The compact, hand-held size along with the rugged, shockproof rubber holster makes this unit ideal for toolboxes and pockets. The Model CA5240 is rated to EN 61010, 600V CAT III for protection against spikes and over-voltage.

Application:

• Installation, repair or maintenance of industrial equipment
• Electrical field testing
• Troubleshooting failures and poor performance.

Product PDF for AEMC Model CA5240
[Catalog No. 2116.77]
Digital Multimeter (40,000-count, TRMS, 0.1% Accuracy)

Product AEMC Model MX21 [Catalog Number 2119.21]
Digital Multimeter (2000-count, average sensing, 1% accuracy with holster) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The Model MX21 is an average sensing 2000-count Digital Multimeter (DMM) designed for everyday electrical applications. The ergonomic design and balance make it very comfortable to hold and operate function selections quickly and easily using the large rotary dial. All standard multimeter functions are available including volts, amps, frequency, ohms, continuity and diode checking. The Model MX21 is safety rated to EN 61010, 600V CAT III.

Features:

• Average sensing
• An innovative design with a compact, double insulated rugged case
• Large, easy-to-read display
• Memory function
• Measure AC volts up to 600V and DC volts up to 600V
• Includes rugged, shockproof, protective holster and test leads
• Dustproof, IP40 rated

Application:

• Measure AC volts and amps in power panels
• Check continuity
• Troubleshoot motor controlled circuits
• Measure resistance, capacitance and frequency.

Product PDF for AEMC Model MX21
[Catalog No. 2119.21]
Digital Multimeter (2000-count, average sensing, 1% accuracy with holster)

Product AEMC Model MX22 [Catalog Number 2119.22]
Digital Multimeter (4000-count, TRMS, 0.5% accuracy with holster) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The Model MX22 is an accurate TRMS Digital Multimeter (DMM) designed for everyday electrical applications. The 4000-count display incorporates a 34-segment bargraph. The ergonomic design and balance make it very comfortable to hold and operate function selections quickly and easily using the large rotary dial. All standard multimeter functions are available including volts, amps, frequency, ohms, continuity and diode checking. The Model MX22 is safety rated to EN 61010, 600V CAT III.

Features:

• TRMS (AC + DC) measurements for accurate results
• An innovative design with a compact, double insulated rugged case
• Large, easy-to-read display with bargraph
• Functions include: Min/Max, Avg and Mem
• Measure AC volts up to 600V and DC volts up to 600V
• Includes rugged, shockproof, protective holster and test leads
• Dustproof, IP40 rated

Application:

• Measure AC volts and amps in power panels
• Check continuity
• Troubleshoot motor controlled circuits
• Measure resistance, capacitance and frequency.

Product PDF for AEMC Model MX22
[Catalog No. 2119.22]
Digital Multimeter (4000-count, TRMS, 0.5% accuracy with holster)

Product AEMC Model MX23 [Catalog Number 2119.23]
Digital Multimeter (5000-count, TRMS, 0.3% accuracy, with holster) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The Model MX23 is an accurate TRMS Digital Multimeter (DMM) designed for everyday electrical applications. The 5000-count display incorporates a 34-segment bargraph. The ergonomic design and balance make it very comfortable to hold and operate function selections quickly and easily using the large rotary dial. All standard mulitmeter functions are available including volts, amps, frequence, ohms, continuity and diode checking plus a low impedance AC volt mode useful in eliminating ghosting. The Model MX23 is safely rated EN 61010, 600V CAT III.

Features:

• TRMS (AC+DC) measurements for accurate results
• An innovative design with a compact, double insulated rugged case
• Large, easy-to-read display with bargraph and backlight
• Memory Function
• Measure AC volts up to 750V and DC volts up to 1000V
• Includes rugged, shockproof, protective holster and test leads plus Multistand (for lead and probe storage)
• Dustproof, IP 40 rated

Application:

• Measure AC volts and amps in power panels
• Check continuity
• Troubleshoot motor controlled circuits
• Measure resistance, capacitance and frequency.

Product PDF for AEMC Model MX23
[Catalog No. 2119.23]
Digital Multimeter (5000-count, TRMS, 0.3% accuracy, with holster)

Product AEMC Model MX24B [Catalog Number 2119.24]
Digital Multimeter (5000-count, TRMS, 0.3% accuracy, with holster) Obsolete
Replacement Product: Request Replacement Product


Manufacture: AEMC
Product Description: The Model MX24B is an accurate TRMS digital Multimeter (DMM) designed for everyday electrical applications. The 5000-count display incorporates a 34-segment bargraph. The ergonomic design and balance make it very comfortable to hold and operate function seclections quickly and easily using the large rotary dial. All standard multimeter functions are available including volts, amps, frequency, ohms, continuity and diode checking plus a low impedance AC volt mode useful in eliminating ghosting. The Model MX24B is safety rated to EN 61010, 600V CAT III.

Features:

• TRMS (AC+DC) measurements for accurate results
• An innovative design with a compact, double insulated rugged case
• Large, easy-to-read display with bargraph and backlight
• Functions include: Min/Max, Avg, Mem and Auto Mem
• Measure AC volts up to 750V and DC volts up to 1000V
• Includes rugged, shockproof, protective holster and test leads plus Multistand (for lead and probe storage)
• Dustproof, IP 40 rated

Application:

• Measure AC volts and amps in power panels
• Check continuity
• Troubleshoot motor controlled circuits
• Measure resistance, capacitance and frequency.

Product PDF for AEMC Model MX24B
[Catalog No. 2119.24]
Digital Multimeter (5000-count, TRMS, 0.3% accuracy, with holster)