AEMC Model 3000-24-2-1 AmpFlex 300/3000A, 24" 10mV/1mV/A [Catalog Number 2113.05]
Manufacture: AEMC Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.
Accuracy 1% of Reading
TRMS measurements when connected to a TRMS instrument
No core saturation or damage if overloaded
Waterproof sensor
Shape Memory for custom pre-shaping of sensor before use
Very high frequency response
Low phase shift for power measurements
Insensitive to DC, measures only AC component on DC + AC signals
Excellent linearity
Lightweight
Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes. Part Number: 2113.05