1. WEIonline Shop >
  2. Manufacturers >
  3. Yokogawa >
  4. Clamp-on Multimeters >
Yokogawa Model- 30032AAC Leakage Current Clamp-On Tester - Product Image

Yokogawa Model- 30032A
AC Leakage Current Clamp-On Tester

Manufacture: Yokogawa
Product Description:
  • Can measure leakage currents of 1mA, which is useful for checking the insulation of low-voltage circuits and electrical components
  • Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60A
  • Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%
  • Filter function can cut off the harmonics - current components from 2nd order (for 30032A only)
  • The design of the clamp lever enables smooth opening/closing of the clamp even for thick cables of 40mm in diameter
  • Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT III 300V, pollution degree 2)

Specifications:
  • Leakage Current Mini Clamp-on; 3/30mA/30/60 Amp
  • Method of detection: Mean Value
  • Display: (Bar-graph display: 32 segments) LCD (Digital display: 3200 counts)
  • Range Switching: Auto-range
  • Operating temperature and humidity: 0 - 50 degrees, 80% RH or less (no condensation)
  • Influence of external magnetic field: 0.0005% typical 1 (on current value of adjacent cable)
  • Influence of conductor position: Within accuracy
  • Safety Standard: Approved for conformity to EN 61010-1,EN 61010-2-032
  • Circuit voltage: 300 Vrms or less
  • Withstanding voltage: 3.7 kV AC for one minute
  • Power Supply: One CR2032 (Coin-shaped) 3 V battery
  • Battery Life: Approx. 90 hours (when continuously used)
  • Auto power-off: Approx. 10 minutes
  • Diameter of measurable conductor: 40 at maximum mm
  • Dimensions: Approx. 70 (W) x 176 (H) x 25 (D) mm
  • Weight: Approx. 200 g
  • Accessories: Instruction manual, battery, Soft case
  • AC Current: 3/30 mA, 30/60A
  • Frequency Characteristics: 50/60 Hz
  • Accuracy (50/60Hz): 1.0 + 5 (0~30mA)
    1.0 + 5 (0~50A)
    5.0 + 5 (50~60A)
  • Measurement Cycle: 2 times/second (Digital display), 12 times/second (Bar-graph display)
  • Temperature Coefficient: 0.05% of range /degrees C or less (within the ranges of 0-18 degrees and 28-50 degrees for measurement of 0-50 A)


Clamp-on Multimeter Selection Guide

Clamp-on Multimeter Product PDF

Part Number: 30032A
Price: $546.00 
   Quantity: