AmpFlex Series

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description:Product 2112.29 AmpFlex 300A, 24" 10mV/A Model 300-24-1-10 Obsolete

Replacement Product:Request Replacement Product

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description:Product 2112.62 AmpFlex 6000A, 24" 0.1mV/A Model 6000-24-1-0.1 Obsolete

Replacement Product:Request Replacement Product

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description: AEMC AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over-loads. The sensor assembly is water-proof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFlex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60"(1520mm).Longer lengths are available.

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description:Product 2114.88 AmpFlex 300/3000A, 36" 3.3mV/0.3mV/A Model 3000-36-2-0.3 Obsolete

Replacement Product:Request Replacement Product

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Application: Measuring wide bus bars, Measuring crowded circuit breaker panels, Measuring around large cable bundles, Measuring in any traditional application, and Measuring around irregular shapes.

Manufacture: AEMC
Product Description:

• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• 9V Alkaline battery for typical use of 2000 hrs continuous operation
• Shape Memory for pre-shaping of sensor before use (no drooping)
• Insensitive to DC, measures only AC component on DC + AC
• Excellent linearity
• EN 61010, 1000V Cat. III (sensor); EN 61010, 600V Cat. III (module)

Application: Load analysis, Data logging, Power quality monitoring, and General purpose current monitoring.

Manufacture: AEMC
Product Description:

• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• 9V Alkaline battery for typical use of 2000 hrs continuous operation
• Shape Memory for pre-shaping of sensor before use (no drooping)
• Insensitive to DC, measures only AC component on DC + AC
• Excellent linearity
• EN 61010, 1000V Cat. III (sensor); EN 61010, 600V Cat. III (module)

Application: Load analysis, Data logging, Power quality monitoring, and General purpose current monitoring.

Manufacture: AEMC
Product Description:

• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• 9V Alkaline battery for typical use of 2000 hrs continuous operation
• Shape Memory for pre-shaping of sensor before use (no drooping)
• Insensitive to DC, measures only AC component on DC + AC
• Excellent linearity
• EN 61010, 1000V Cat. III (sensor); EN 61010, 600V Cat. III (module)

Application: Load analysis, Data logging, Power quality monitoring, and General purpose current monitoring.

Manufacture: AEMC
Product Description:

• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• 9V Alkaline battery for typical use of 2000 hrs continuous operation
• Shape Memory for pre-shaping of sensor before use (no drooping)
• Insensitive to DC, measures only AC component on DC + AC
• Excellent linearity
• EN 61010, 1000V Cat. III (sensor); EN 61010, 600V Cat. III (module)

Application: Load analysis, Data logging, Power quality monitoring, and General purpose current monitoring.

Manufacture: AEMC
Product Description:

• 24" flexible sensor fits around conductors up to 7.6" in diameter
• Dual measurement ranges of 300A and 3000AAC
• Read amperage directly on DMM display
• mV output directly proportional to the AC current measured
• Output is 10mV/A on 300A range and 1mV/A on 3000A range
• Accuracy of 1% of Reading + - 500mA
• 4% influence of conductor position in jaw
• Up to 150 hours battery life
• Dual banana plug termination for direct input into DMMs
• EN 61010, 1000V, Cat. III, Pollution Degree 2
• Flashing LED low battery indicator

Manufacture: AEMC
Product Description:Product 2120.82 FlexProbe Model 24-3002 Obsolete

Replacement Product:Request Replacement Product

• 24" flexible sensor fits around conductors up to 7.6" in diameter
• Dual measurement ranges of 300A and 3000AAC
• Read amperage directly on DMM display
• mV output directly proportional to the AC current measured
• Output is 10mV/A on 300A range and 1mV/A on 3000A range
• Accuracy of 1% of Reading + - 500mA
• 4% influence of conductor position in jaw
• Up to 150 hours battery life
• Electronic module with 4mm safety banana plugs with 3/4" spacing
• EN 61010, 1000V Cat. III, Pollution Degree 2
• Flashing LED low battery indicator

Manufacture: AEMC
Product Description: The MiniFlex Model 300-6-2-10 (30/300A - 100mV/10mV/A) is a new flexible sensor for AC current measurements. Significantly more compact than the majority of the sensors on the market, the MiniFlex sensor can be used for measurements in confined spaces or places where access is difficult. The Model MF 300-6-2-10 has a 6" sensor length and is equipped with banana or BNC connector and can be connected directly to any multimeter, wattmeter or logger for effective measurements at the standard frequencies.

• Measures from 0.5Arms to 300Arms
• Accuracy 1% of Reading + - 0.2A
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Overrange LED for measurement circuitry
• EN 61010; 1000V CAT III; 600V CAT IV; CE Mark
• 20kHz frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only
• AC component on DC + AC signals
• Excellent linearity

Application: Power measurements, Measurements on switchboards, Measurements on thyristors, Switching measurements (disconnecting switch, etc.), and Display of control signals.

Manufacture: AEMC
Product Description: The MiniFlex Model 3000-10-2-1 (300/3000A - 10mV/1mV/A) is a new flexible sensor for AC current measurements. Significantly more compact than the majority of the sensors on the market, the MiniFlex sensor can be used for measurements in confined spaces or places where access is difficult. The Model MF 3000-10-2-1 has a 10" sensor length and is equipped with banana or BNC connector and can be connected directly to any multimeter, wattmeter or logger for effective measurements at the standard frequencies.

• Measures from 0.5Arms to 3000Arms
• Accuracy 1% of Reading + - 0.2A
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Overrange LED for measurement circuitry
• EN 61010; 1000V CAT III; 600V CAT IV; CE Mark
• 20kHz frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only
• AC component on DC + AC signals
• Excellent linearity

Application: Power measurements, Measurements on switchboards, Measurements on thyristors, Switching measurements (disconnecting switch, etc.), and Display of control signals.

Manufacture: AEMC
Product Description: The High Frequency Model MF 300-6-2-10 HF MiniFlex Probe is a compact flexible AC current measurement device composed of a flexible sensor and an electronic module. It is designed to measure AC Current from 5Hz to 1MHz. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The flexible sensor is available in lengths of 6" and 10".

• Measures from 0.5Arms to 300Arms
• Accuracy 1% of Reading + - 0.3A
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• 9V battery for typical 140 hour continuous operation
• 1MHz frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight
• Sensor is resistant to oils and aliphatic hydrocarbons
• EN 61010; 1000V CAT III; 600V CAT IV; CE Mark

Application: Power measurements, Measurements on thyristors and SCRs, Switching measurements (disconnecting switch, etc.), Measurements on switchgear, and Control signals.

Manufacture: AEMC
Product Description: The High Frequency Model MF 300-10-2-10 HF MiniFlex Probe is a compact flexible AC current measurement device composed of a flexible sensor and an electronic module. It is designed to measure AC Current from 5Hz to 1MHz. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The flexible sensor is available in lengths of 6" and 10".

• Measures from 0.5Arms to 300Arms
• Accuracy 1% of Reading + - 0.3A
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• 9V battery for typical 140 hour continuous operation
• 1MHz frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight
• Sensor is resistant to oils and aliphatic hydrocarbons
• EN 61010; 1000V CAT III; 600V CAT IV; CE Mark

Application: Power measurements, Measurements on thyristors and SCRs, Switching measurements (disconnecting switch, etc.), Measurements on switchgear, and Control signals.

Manufacture: AEMC
Product Description:

Manufacture: AEMC
Product Description: Set of (3) Color-coded 36" (6500A) AmpFlex Sensors-Model 193-36 for use with Model 3945/3945-B

Manufacture: AEMC
Product Description:

Manufacture: AEMC
Product Description:

Manufacture: AEMC
Product Description: AmpFlex Sensor 24" Model 193-24-BK (6500A) For use with Models 8220, 8230 & 3945/3945-B.

Manufacture: AEMC
Product Description: AmpFlex Sensor 36" Model 193-36-BK (6500A) For use with Models 8220, 8230 & 3945/3945-B.

Manufacture: AEMC
Product Description:The MiniFlex Model MA193 sensor can only be used as an accessory for the following power quality meters: Model 3945-B, 8335, 8220 and 8230. Identify the sensor with the color rings supplied with the instrument if you are using multiple MiniFlex sensors.