Leakage Current

Manufacture: Yokogawa
Product Description: Handy Universal tester for checking electrical appliance Leakage Current Tester (AC/DC AC Current, DC Current, DC+AC Current, AC Voltage).

Features: High sensitivity (Accuracy:

Manufacture: Yokogawa
Product Description: Leakage current measurement with current range from 40mA to 400A.

Leakage current measurement. These clamps allow you to measure current range from 3mA to 1000A. Choose your desired diameter of measurable conductor from 24mm to 68mm.

• Manual range switching and auto power-off functions
• 40mm in diameter of measurable conductor
• Auto power-off
• Approved for comformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)

Clamp-on Multimeter Selection Guide

Clamp-on Testers Data Sheet

Manufacture: Yokogawa
Product Description: Leakage current measurement with current range from 20mA to 200A.

CL300 series, 310 series and 30031 have basic function of leakage current measurement. These clamps allow you to measure current range from 3mA to 1000A. Choose your desired diameter of measurable conductor from 24mm to 68mm.

• Light weight and compact design
• Manual range switching and auto power-off functions
• 24mm in diameter of measurable conductor
• Mean value display
• Auto power-off
• Manual range switching
• Approved for comformity to safety standards EN61010-1,EN61010-2-032(CAT. III 300 V)

Clamp-on Multimeter Selection Guide

Clamp-on Testers Data Sheet

Manufacture: Yokogawa
Product Description:

• Leakage current measurement with current range from 200mA to 1000A
• AC and DC output
• 68mm in diameter of measurable conductor
• Approved for conformity to safety standards EN 61010-1, EN 61010-2-032 (CAT III 300 V)

Clamp-on Multimeter Selection Guide

Clamp-on Testers Data Sheet

Manufacture: Yokogawa
Product Description:

• Leakage current measurement with current range from 40mA to 400A
• Manual range switching and auto power-off functions
• 40mm in diameter of measurable conductor
• True RMS display
• Auto power-off
• Manual range switching
• Approved for comformity to safety standards EN61010-2-032 (CAT. III 300 V)

Clamp-on Multimeter Selection Guide

Clamp-on Testers Data Sheet

Manufacture: AEMC
Product Description: The TRMS Clamp-On Leakage Current Meter Model 565 is designed to measure low AC currents, which are typically leakage currents in ground conductors. Low currents are measured using either 60mA or the 600mA range. The high sensitivity of the probe (10microA and 100microA) is possible through special jaw construction and, in particular, critical shielding of the jaws. At low measurement levels, this shielding out of the noise is critical for low sensitivity, accuracy and stability.

The Model 565 may be used as a standard clamp-on meter measuring to 100Arms, as well as AC Volts and DC Volts, resistance and continuity (with a buzzer).

The Model 565 is ergonomic in design and fits well in the hand, facilitating one hand operation. The jaw size is compact yet designed to accommodate the most common conductors up to 1 (26mm) in diameter.

Features:

• Check for leakage and locate insulation breakdowns on live circuits.
• Measures leakage current up to 600mA with up to 10microA resolution.
• Measures current up to 100Arms
• Measures up to 600Vac/dc
• Measures Hz on either V or A inputs
• Measures Resistance and Continuity
• Hold feature freezes Value
• Max feature keeps track of highest measured In-rush value
• Zero button ideal for measuring relative values
• Filter to isolate 50/60Hz fundamental from harmonics
• Compatible with VDE 0404

Application:

• Ground fault current measurement
• Electrical safety compliance testing
• Medical device safety testing
• Process loop monitoring
• General AC load monitoring
• Industrial troubleshooting checks

Data Sheet

Manufacture: Yokogawa
Product Description:

• Can measure leakage currents of 1mA, which is useful for checking the insulation of low-voltage circuits and electrical components
• Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60A
• Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%
• Filter function can cut off the harmonics - current components from 2nd order (for 30032A only)
• The design of the clamp lever enables smooth opening/closing of the clamp even for thick cables of 40mm in diameter
• Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT III 300V, pollution degree 2)

Specifications:

• Leakage Current Mini Clamp-on; 3/30mA/30/60 Amp
• Method of detection: Mean Value
• Display: (Bar-graph display: 32 segments) LCD (Digital display: 3200 counts)
• Range Switching: Auto-range
• Operating temperature and humidity: 0 - 50 degrees, 80% RH or less (no condensation)
• Influence of external magnetic field: 0.0005% typical 1 (on current value of adjacent cable)
• Influence of conductor position: Within accuracy
• Safety Standard: Approved for conformity to EN 61010-1,EN 61010-2-032
• Circuit voltage: 300 Vrms or less
• Withstanding voltage: 3.7 kV AC for one minute
• Power Supply: One CR2032 (Coin-shaped) 3 V battery
• Battery Life: Approx. 90 hours (when continuously used)
• Auto power-off: Approx. 10 minutes
• Diameter of measurable conductor: 40 at maximum mm
• Dimensions: Approx. 70 (W) x 176 (H) x 25 (D) mm
• Weight: Approx. 200 g
• Accessories: Instruction manual, battery, Soft case
• AC Current: 3/30 mA, 30/60A
• Frequency Characteristics: 50/60 Hz
• Accuracy (50/60Hz): 1.0 + 5 (0~30mA)
  1.0 + 5 (0~50A)
  5.0 + 5 (50~60A)
• Measurement Cycle: 2 times/second (Digital display), 12 times/second (Bar-graph display)
• Temperature Coefficient: 0.05% of range /degrees C or less (within the ranges of 0-18 degrees and 28-50 degrees for measurement of 0-50 A)

Clamp-on Multimeter Selection Guide

Clamp-on Multimeter Product PDF