Manufacture: AEMC Product Description: The Model F07 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities.
Integrating a fast microprocessor sampling at a high rate, the Model F07 is completely automatic and performs TRMS measurements on the most distorted waveforms. The Model F07 measures TRMS Voltage and Current and can incorporate the DC component of the signal for the Truest RMS. It has a V-Live function to warn of the use of live circuits or elevated voltages. Temperature measurements up to 1832 degrees F (1000 degrees C) can be taken via standard K thermocouple. The Model F07 can measure in-rush currents from 1 cycle up to 10 cycles and frequency. Other features include: auto-ranging, 4000-count display and Auto-Off.
Features:
Hand-held size, ultra practical and ergonomic design
TRMS measurement through fast sampling - accurate on non-linear waveforms
4kHz Bandwidth
3.5 Crest Factor at 600Arms and 900Vrms
Peak function captures 500micro s signals
Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
Min/Max automatic capture of extreme values at 100ms samples
Continuity at programmable buzzer threshold from 1 to 40ohm
Selectable V-Live function (buzzer) warns of live circuit
Temperature measurements up to 1832 degrees F (1000 degrees C) via standard K thermocouple
Automatic DC current zeroing
Backlit LCD
Battery life displayed directly in hours at the push of a button
Manufacture: AEMC Product Description: The Clamp-On Meter Model 502 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Model 502 is a True RMS clamp-on which provides RMS measurements for measuring in non-linear electrical environments.
This clamp-on multimeter is auto-ranging, and provides the user with AAC,VAC, VDC, Ohms, Continuity, as well as a frequency measurement function. The jaw opening for the Model 502 is 1.1 (28mm).
Features:
Compact size - fits into your pocket
400AAC current measurements
600VAC/DC volts measurements
TRMS measurements
Resistance measurements to 400ohm
Continuity with beeper below 40ohm
Frequency measurements from V and A
Hold function to freeze readings
Large easy-to-read 4000-count display
42-segment bargraph
Includes test leads and a soft carrying pouch
Application:
Industrial, commercial, HVAC and residential troubleshooting
Power panel, junction box and battery bank monitoring
Electrical testing and troubleshooting on traditional and non-linear leads, such as adjustable speed drives and computers.
Manufacture: AEMC Product Description: The Clamp-On Meter Model 500 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Model 500 is auto-ranging, and provides the user with AC Volts, AC Amperes, resistance, and continuity. The large and complete 4000-count LCD features comprehensive user interface symbols such as a low battery indicator. It is equipped with a Data Hold function, which freezes the measurement. The Model 500 is compact for comfortable one-handed operation, and the hooked jaw design is easy to maneuver in crowded wiring and breaker panels. The jaw opening for the Model 500 is 1.1 (28mm).
Features:
Compact size - fits into your pocket
400AAC current measurements
600VAC volts measurements
Resistance measurements to 400ohm
Continuity with beeper below 35ohm
Hold function to freeze readings
Large easy-to-read 4000-count display
42-segment bargraph
Includes test leads and a soft carrying pouch
Application:
Electrical testing of distorted currents found on uninterruptible power supplies (UPS), speed controls, static power blocks, chopped power supplies, controllers and motors.
Manufacture: Yokogawa Product Description: AC/DC current measurements with current ranges up to 2000A. True RMS display.
CL200 series has basic function of AC/DC current measurement. These clamps allow you to measure current range from 40mA to 2000A. Choose your desired diameter of measurable conductor from 24mm to 55mm.
AC/DC voltage and resistance measurements
DC output
55mm in diameter of measurable conductor
Sleep function
Data hold function
Approved for comformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V) /Hz
Manufacture: Yokogawa Product Description: The CW10 is more like a tester type rather than a recorder, which can measure single phase AC and DC Power, Voltage, Currents, Power Factor, Frequency, Harmonics. It will also contribute to workers maintenance of not only consuming equipment but equipment for renewable energy such as solar and wind power generation.
The CW10 possesses a joystick that allows the user to easily select the preferred diagnostic function. The display is backlit when clamping and contains a 3.5 digit and bar graph display.
Features:
AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
True RMS for AC
Harmonics 1st to 25th order
Power fluctuation using the ACA Inrush and Peak hold functions
Frequency, Resistance, Continuity, Diode check, Power factor
Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45mm max.)
CATIV 600V and CATIII 1000V compliant for safety and CE rated
Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping
Non-contact Voltage Detection (Red LED lights up on detection)
Easy Operation with the Navigator key
Low Pass Filter, Phase Detection, AC / DC Auto Sense
Manufacture: AEMC Product Description: The Model F05 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities.
Integrating a fast microprocessor sampling at a high rate, the Model F05 is completely automatic and performs TRMS measurements on the most distorted waveforms. The Model F05 automatically detects AC or DC in Voltage and Current. It has a V-Live function to warn of the use of live circuits or elevated voltages. The Model F05 can measure in-rush currents from 1 cycle up to 10 cycles and frequency. It also measures Phase Rotation (using only two leads!), Power Factor and Power. Other features include: auto-ranging, 4000-count display and Auto-Off.
Features:
Hand-held size, ultra practical and ergonomic design
TRMS measurement through fast sampling - accurate on non-linear waveforms
4kHz Bandwidth
3.5 Crest Factor at 600Arms and 900Vrms
Peak function captures 500micro s signals
Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
Min/Max automatic capture of extreme values at 100ms samples
Measure V, A, Ohms, kW, Hz, Phase Rotation, AC plus DC
Continuity at programmable buzzer threshold from 1 to 40ohm
Selectable V-Live function (buzzer) warns of live circuit
Automatic DC current zeroing
Backlit LCD
Battery life displayed directly in hours at the push of a button
Manufacture: AEMC Product Description: The Clamp-On Meter Model 511 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 511 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.
The Model 511 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function.
The Model 511 is sized for a comfortable, one-handed operation. This model is average sensing and designed for traditional average responding electrical systems. The jaw opening for the Model 511 is 1.575 (40mm).
Features:
Standard size, full function clamp-on meter
1000AAC current measurements
750VAC/1000VDC volt measurements
Resistance measurement to 4000ohm
Continuity with beeper below 40ohm
Frequency measurements from V and A
Diode test
1ms Peak function for fast capture of signals
Hold function to "freeze" readings
Push-button for easy ADC zeroing
Large easy-to-read 4000-count display
42-segment analog bargraph
Includes test leads and soft carrying pouch
Application:
Commercial, industrial, residential and HVAC troubleshooting
Power panel, junction box and battery bank monitoring
AC or DC motor testing
Power plant troubleshooting
Electrical testing and troubleshooting on traditional loads.
Manufacture: AEMC Product Description: The Clamp-On Meter Model 503 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Model 503 is auto-ranging, and provides the user with AC Volts, DC Volts, AC Amperes, DC Amperes, resistance, and continuity.
The large and complete 4000-count LCD features comprehensive user interface symbols such as a low battery indicator. It is equipped with a Data Hold function, which freezes the measurement. The Model 503 is compact for comfortable one-handed operation, and the hooked jaw design is easy to maneuver in crowded wiring and breaker panels. The jaw opening for the Model 503 is 1.1 (28mm).
Features:
Compact size - fits into your pocket
400AAC or 400AAC/DC current measurements
600VAC/DC volts measurements
Resistance measurements to 400ohm
Continuity with beeper below 40ohm
Hold function to freeze readings
Push-button for easy ADC zeroing
Large easy-to-read 4000-count display
42-segment bargraph
Includes test leads and a soft carrying pouch
Application:
Industrial, commercial, HVAC and residential troubleshooting
Power panel, junction box and battery bank monitoring
Electrical testing and troubleshooting on traditional and non-linear leads, such as adjustable speed drives and computers.
Manufacture: Yokogawa Product Description: AC/DC current measurements with current ranges up to 300A.
CL200 series has basic function of AC/DC current measurement. These clamps allow you to measure current range from 40mA to 2000A. Choose your desired diameter of measurable conductor from 24mm to 55mm.
Light weight and compact design
24mm in diameter of measurable conductor
Mean value display
Sleep function
Approved for comformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)
Manufacture: AEMC Product Description: Updated Operating Temperature Specification: -14 degrees to 122 degrees F (-25 to 50 degrees C), 80% RH, non-condensing
The Clamp-On Meter Model 514 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.
The Model 514 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A.
The Model 514 is sized for a comfortable, one-handed operation. This model is True RMS sensing responding to distorded signal electrical systems. The jaw opening for the Model 514 is 1.575 (40mm).
Features:
Standard size, full function clamp-on meter
1000AAC/DC current measurements
750VAC/1000VDC volt measurements
TRMS measurements
Resistance measurement to 4000ohm
Continuity with beeper below 40ohm
Frequency measurements from V and A
Diode test
1ms Peak function for fast capture of signals
Hold function to "freeze" readings
Push-button for easy ADC zeroing
Large easy-to-read 4000-count display
42-segment analog bargraph
Includes test leads and soft carrying case
Application:
Commercial, industrial, residential and HVAC troubleshooting
Power panel, junction box and battery bank monitoring
AC or DC motor testing
Power plant troubleshooting
Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers.
Manufacture: AEMC Product Description: The Model F09 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities. Integrating a fast microprocessor sampling at a high rate, this meter is completely automatic and performs TRMS measurements on the most distorted waveforms.
The Model F09 automatically detects AC or DC in Voltage and Current. It has a V-Live function to warn of the use of live circuits or elevated voltages. This meter can measure inrush currents from 1 cycle up to 10 cycles and frequency. It also measures Phase Rotation (using only two leads!), Power Factor and Power. Other features include: auto-ranging, 4000 count display and Auto Off.
Features:
Hand-held size, ultra practical and ergonomic design
TRMS measurement through fast sampling - accurate on non-linear waveforms
AC or DC and AC plus DC measurement in V and A
4kHz Bandwidth
3.5 Crest Factor at 600Arms and 900Vrms
Peak function captures 500micro s signals
Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
Min/Max automatic capture of extreme values at 100ms samples
Measure V, A, Ohms, kW, Hz, Phase Rotation, AC plus DC
Continuity at programmable buzzer threshold from 1 to 40ohm
Selectable V-Live function (buzzer) warns of live circuit
Automatic DC current zeroing
Backlit LCD
Battery life displayed directly in hours at the push of a button
Manufacture: AEMC Product Description: Updated Operating Temperature Specification: -14 degrees to 122 degrees F (-25 to 50 degrees C), 80% RH, non-condensing
The AEMC Model 675 is a general purpose professional clamp-on meter that measures up to the toughest standards. This meter offers a complete set of measurement ranges (AC Amps, DC Amps, AC Volts, DC Volts, Ohms, Continuity with beeper, Frequency from V or A, and Temperature) and is in compliance with international safety and quality standards to ensure professional and reliable measuring tools.
This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.
The Model 675 is sized for comfortable, one-handed operation. The tapered and hooked jaw design facilitates maneuvering in crowded wiring and breaker panels, making it easy to select conductors. The jaw opening accommodates one 750kcmil cable or two 350kcmil cables. The large and easy to read 9999 count LCD features comprehensive user information symbols, such as low battery, polarity, overload, and an analog bargraph for easy trend readings. The Model 675 is equipped with a Data Hold function that freezes the measurement for later viewing, Min/Max, and Peak function for capture of signals. This Model 675 is a True RMS clamp on meter that provides RMS measurements for todays non-linear electrical environments.
Features:
Standard size, full function clamp-on meter
1000AAC/DC current measurements
1400VDC volt measurements
TRMS measurements
Resistance measurement to 10,000ohm
Continuity with beeper below 35ohm
Frequency measurements from V and A
1ms Peak function for fast capture of signals
Hold function to freeze readings
Designed to measure Amps and Volts at the same time
Push-button for easy ADC zeroing
Large easy-to-read 9999-count backlit display
Includes test leads and soft carrying case
Application:
Commercial, industrial, residential and HVAC troubleshooting
Power panel, junction box and battery bank monitoring
AC or DC motor testing
Power plant troubleshooting
Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers.
Manufacture: AEMC Product Description: The Clamp-On Meter Model 512 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 512 is autoranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 512 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Model 512 is sized for a comfortable, one-handed operation. This model is a True RMS clamp-on that provides RMS measurements for today's non-linear electrical environments. The Model 512 includes a pair of test leads (red/black with probe tips), 9V battery, soft carrying pouch and a user manual.
Features:
Standard size, full function clamp-on meter
1000AAC current measurements
750VAC/1000VDC volt measurements
TRMS measurements
Resistance measurement to 4000ohm
Continuity with beeper below 40ohm
Frequency measurements from V and A
Diode test
1ms Peak function for fast capture of signals
Hold function to "freeze" readings
Large easy-to-read 4000-count display
42-segment analog bargraph
Includes test leads and soft carrying pouch
Application:
Commercial, industrial, residential and HVAC troubleshooting
Power panel, junction box and battery bank monitoring
AC or DC motor testing
Power plant troubleshooting
Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers.
Manufacture: AEMC Product Description:The Artificial Neutral Model AN-1 generates a momentary grounded artificial neutral to allow the measurement of fault currents on ungrounded three-phase systems.
The Artificial Neutral is grounded intermittently through a relay driven by an internal electronic timer. This periodic grounding technique performs three functions limits the possibility of insulation faults within the instrument, allows for better discrimination of actual fault current and limits instrument overheating.
Relay closure time is switch selectable, Fast (0.5 seconds) or Slow (2.3 seconds), so that the ground fault clamp can be used on a meter with either an analog or digital display. An internal buzzer, also driven by the relay, is activated each time the neutral connection is grounded. Three LEDs, one for each phase, show the presence of each of the three phases prior to measurement. A fourth green LED indicates that the instrument is operating.
Features:
Designed for ungrounded networks, provides intermittent path to ground for leakage current measurements
Works from 30 to 600VAC
Red LED phase fault indicator
Switch selectable ground fault cycling of 500mS or 2.3 seconds
Buzzer alerts each momentary fault
Battery operated
Double insulated, fire retardant case
Four color-coded 5 ft 1000V rated leads supplied with alligator clips
Works with Model 2620 and other leakage current probes
Manufacture: AEMC Product Description: The Multifunction Clamp-on Meter Model CM605 is an ideal choice for both process and general industrial markets. It is also the perfect instrument for measuring 4 to 20mA process signals, as well as, the higher currents (up to 100A) associated with general industrial monitoring and troubleshooting.
The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage, up to 600V, and AC/DC current. It can also measure resistance up to 10k and includes a continuity buzzer to assist in circuit verification.
For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
Features:
10,000-count LCD Display - Excellent Resolution
100AAC/DC Ammeter with low 10A Range (1mA Resolution)
Tapered Jaws for crowded wiring or areas ( 0/ .60 - 15mm Jaw Opening)
600VAC/DC Voltmeter
Analog Output in AAC/DC
Auto-Ranging & ADC Zero Push-button
Data HOLD & PEAK Functions
Relative Function to Compare Two Measurements
Ohm Range & Continuity Test with Beeper, 600V Protection
Manufacture: Yokogawa Product Description: AC/DC current measurements with current ranges up to 600A for AC and 1000A for DC. True RMS display.
CL200 series has basic function of AC/DC current measurement. These clamps allow you to measure current range from 40mA to 2000A. Choose your desired diameter of measurable conductor from 24mm to 55mm.
AC/DC voltage, resistance and frequency measurements
33mm in diameter of measurable conductor
Sleep function
Data hold function
Approved for comformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V)
Manufacture: AEMC Product Description: Updated Operating Temperature Specification: -14 degrees to 122 degrees F (-25 to 50 degrees C), 80% RH, non-condensing
The AEMC Model 670 is a general purpose professional clamp-on meter that measures up to the toughest standards. This meter offers a complete set of measurement ranges (AC Amps, AC Volts, DC Volts, Ohms, Continuity with beeper, Frequency from V or A, and Temperature) and is in compliance with international safety and quality standards to ensure professional and reliable measuring tools.
This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.
The Model 670 is sized for comfortable, one-handed operation. The tapered and hooked jaw design facilitates maneuvering in crowded wiring and breaker panels, making it easy to select conductors. The jaw opening accommodates one 750kcmil cable or two 350kcmil cables. The large and easy to read 9999 count LCD features comprehensive user information symbols, such as low battery, polarity, overload, and an analog bargraph for easy trend readings. The Model 670 is equipped with a Data Hold function that freezes the measurement for later viewing, Min/Max, and Peak function for capture of signals. This Model 670 is a True RMS clamp-on meter that provides RMS measurements for todays non-linear electrical environments.
Features:
Standard size, full function clamp-on meter
1000AAC current measurements
1400VDC volt measurements
TRMS measurements
Resistance measurement to 10,000ohm
Continuity with beeper below 35ohm
Frequency measurements from V and A
1ms Peak function for fast capture of signals
Hold function to freeze readings
Designed to measure Amps and Volts at the same time
Push-button for easy ADC zeroing
Large easy-to-read 9999-count backlit display
Includes test leads and soft carrying case
Application:
Commercial, industrial, residential and HVAC troubleshooting
Power panel, junction box and battery bank monitoring
AC or DC motor testing
Power plant troubleshooting
Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers.
Manufacture: Yokogawa Product Description: AC/DC current measurements with current ranges up to 2000A.
CL200 series has basic function of AC/DC current measurement. These clamps allow you to measure current range from 40mA to 2000A. Choose your desired diameter of measurable conductor from 24mm to 55mm.
AC/DC voltage and resistance measurements
DC output
55mm in diameter of measurable conductor
Mean value display
Sleep function
Data hold function
Approved for comformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
![AEMC Model F07 [Catalog No. 2129.54]Clamp-on Meter Model F07(TRMS, 400AAC/DC, 600VAC/DC, Hz, Ohms, Continuity, Temperature) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-F07-TRMS-400AAC-DC-600VAC-DC-Hz-Ohms-Continuity-Temperature--Catalog-Number-2129.549118-82840_th.jpg "AEMC Model F07 [Catalog No. 2129.54]Clamp-on Meter Model F07(TRMS, 400AAC/DC, 600VAC/DC, Hz, Ohms, Continuity, Temperature)")
![AEMC Model 502 [Catalog No. 2117.66]Clamp-on Meter Model 502(TRMS, 400AAC, 600VAC/DC, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-502-TRMS-400AAC-600VAC-DC-Ohms-Continuity--Catalog-Number-2117.669108-82830_th.jpg "AEMC Model 502 [Catalog No. 2117.66]Clamp-on Meter Model 502(TRMS, 400AAC, 600VAC/DC, Ohms, Continuity)")
![AEMC Model 500 [Catalog No. 2117.54]Clamp-on Meter Model 500(AC, 400AAC, 600VAC, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-500-AC-400AAC-600VAC-Ohms-Continuity--Catalog-Number-2117.549107-82829_th.jpg "AEMC Model 500 [Catalog No. 2117.54]Clamp-on Meter Model 500(AC, 400AAC, 600VAC, Ohms, Continuity)")
![AEMC Model F05 [Catalog No. 2129.53]Clamp-on Meter Model F05(TRMS, 400AAC/DC, 600VAC/DC, Hz, Power(kW), Phase Rotation, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-F05-TRMS-400AAC-DC-600VAC-DC-Hz-PowerkW-Phase-Rotation-Ohms-Continuity--Catalog-Number-2129.539117-82839_th.jpg "AEMC Model F05 [Catalog No. 2129.53]Clamp-on Meter Model F05(TRMS, 400AAC/DC, 600VAC/DC, Hz, Power(kW), Phase Rotation, Ohms, Continuity)")
![AEMC Model 511 [Catalog No. 2117.67]Clamp-on Meter Model 511(AC, 1000AAC, 600VAC/DC, Hz, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-511-AC-1000AAC-600VAC-DC-Hz-Ohms-Continuity--Catalog-Number-2117.679114-82836_th.jpg "AEMC Model 511 [Catalog No. 2117.67]Clamp-on Meter Model 511(AC, 1000AAC, 600VAC/DC, Hz, Ohms, Continuity)")
![AEMC Model 503 [Catalog No. 2117.22]Clamp-on Meter Model 503(AC/DC, 400AAC/DC, 600VAC/DC, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-503-AC-DC-400AAC-DC-600VAC-DC-Ohms-Continuity--Catalog-Number-2117.229109-82831_th.jpg "AEMC Model 503 [Catalog No. 2117.22]Clamp-on Meter Model 503(AC/DC, 400AAC/DC, 600VAC/DC, Ohms, Continuity)")
![AEMC Model 514 [Catalog No. 2117.70]Clamp-on Meter Model 514(AC/DC, TRMS, 1000AAC/DC, 600VAC/DC, Hz, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-514-AC-DC-TRMS-1000AAC-DC-600VAC-DC-Hz-Ohms-Continuity--Catalog-Number-2117.709116-82838_th.jpg "AEMC Model 514 [Catalog No. 2117.70]Clamp-on Meter Model 514(AC/DC, TRMS, 1000AAC/DC, 600VAC/DC, Hz, Ohms, Continuity)")
![AEMC Model F09 [Catalog No. 2129.50]Clamp-on Meter Model F09(TRMS, 400AAC/DC, 600VAC/DC, kW, kVAR, kVA, Ohms, Continuity, Phase Rotation) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-F09-TRMS-400AAC-DC-600VAC-DC-kW-kVAR-kVA-Ohms-Continuity-Phase-Rotation--Catalog-Number-2129.509112-82834_th.jpg "AEMC Model F09 [Catalog No. 2129.50]Clamp-on Meter Model F09(TRMS, 400AAC/DC, 600VAC/DC, kW, kVAR, kVA, Ohms, Continuity, Phase Rotation)")
![AEMC Model 675 [Catalog No. 2117.50]Clamp-on Meter Model 675(Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-675-Dual-Display-TRMS-AC-DC-Amps--Volts-Ohms-Continuity-Frequency--Temperature--Catalog-Number-2117.509113-82835_th.jpg "AEMC Model 675 [Catalog No. 2117.50]Clamp-on Meter Model 675(Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature)")
![AEMC Model 512 [Catalog No. 2117.68]Clamp-on Meter Model 512(TRMS, 1000AAC, 600VAC/DC, Hz, Ohms, Continuity) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-512-TRMS-1000AAC-600VAC-DC-Hz-Ohms-Continuity--Catalog-Number-2117.689115-82837_th.jpg "AEMC Model 512 [Catalog No. 2117.68]Clamp-on Meter Model 512(TRMS, 1000AAC, 600VAC/DC, Hz, Ohms, Continuity)")
![AEMC Model AN1 [Catalog No. 1971.01]Artificial Neutral Model AN1 - Product Image](https://www.weionline.com/shop/images/Artificial-Neutral-Model-AN1--Catalog-Number-1971.019120-82842_th.jpg "AEMC Model AN1 [Catalog No. 1971.01]Artificial Neutral Model AN1")
![AEMC Model CM605 [Catalog No. 7000.02]Clamp-on Meter Model CM605(100AAC/DC, Low Current) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-CM605-100AAC-DC-Low-Current--Catalog-Number-7000.029119-82841_th.jpg "AEMC Model CM605 [Catalog No. 7000.02]Clamp-on Meter Model CM605(100AAC/DC, Low Current)")
![AEMC Model 670 [Catalog No. 2117.49]Clamp-on Meter Model 670(Dual Display, TRMS, AC Amps, AC/DC Volts, Ohms, Continuity, Frequency, & Temperature) - Product Image](https://www.weionline.com/shop/images/Clamp-on-Meter-Model-670-Dual-Display-TRMS-AC-Amps-AC-DC-Volts-Ohms-Continuity-Frequency--Temperature--Catalog-Number-2117.499110-82832_th.jpg "AEMC Model 670 [Catalog No. 2117.49]Clamp-on Meter Model 670(Dual Display, TRMS, AC Amps, AC/DC Volts, Ohms, Continuity, Frequency, & Temperature)")
